Being a car owner has some major expenses – insurance, fuel, and maintenance, usually exhaust the savings one has. Never the less, It is important to take the vehicle to a service station once a year. It prolongs the life of the car and ensures excellent performance.
You can also perform a service by yourself with minimum requirements. It will save you a decent amount of cash, which would have otherwise have gone to the professionals. Some of the benefits of servicing your own car includes:
When you service your car, you perform thorough quality checks. The standard of the products used to replace will also be the best from the market, most of the products are available at service centers like oil change Taylor MI.
Doing it yourself saves a person from significant costs. It is expensive in today's age to service a car. You can easily save the service costs, which are getting expensive each passing year.
Many people have time constraints. They can’t leave the vehicle for days at a workshop like Car repair Taylor MI and wait. When a person needs quick service, they can easily do the basics themselves.
There is a bare minimum requirements which is needed of you to manage the service. These include:
- A bucket in place of an oil drain tray
- A torque wrench
- Screwdrivers
- Carjack
- Axle stands or a set of ramps
- Tire pressure gauge from Brake Repair Taylor
- Funnel
- Gloves
All these are a one-time expense which will be used repeatedly in the future. It is recommended to invest in acquiring the proper tools once you have them you’ll reap many benefits. Apart from the tools, there are some components which you need according to what your car needs as well.
- Oil
- Oil filter
- Sparkplugs
- Air Filter
- Antifreeze
- Windscreen Washer fluid
These are the essential servicing equipment which is changed periodically. It is readily available in local Car Repair Taylor MI shops. You have the requirements to perform the job, lets go over the most frequent DIY task you need to perform for your car.
Before the oil change, it is advisable to drive the car couple of kilometers to get the oil running more freely. It will be easier when you start driving it, you will need to get the car on a higher platform to work under the car.
The axle stands are used in this case. You need to place the bucket underneath the gauge and then remove the filter. It is a good practice to remove the oil cap from the top, so there is no vacuum when the oil drains.
The sump plug is usually a 14mm bolt, which is undergone by a socket wrench. When the draining is in process, you can also remove the oil filter. It is the easiest way to perform the most frequent service task you will need after owning a car.
